SSI-2020 48-in. LC Pneumatic Tire Forklift / XH-550M

SSI-2020

48-in. LC Pneumatic Tire Forklift
XH-550M

XH-550M ArrayClick Image to Enlarge

Taylor® XH-550M

The XH-550M is capable of handling long duty cycles with a lift capacity of 55,000lbs. Taylor 48-in Load Center Pneumatic Tire forklifts are engineered to meet the needs of the following industries: Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring. Own a Taylor forklift and you'll never turn back. That's because Taylor Big Red designs, engineers and manufactures the Ultimate Heavy Lift Trucks
Print Friendly

  • Capacity: 55000 lbs / 24948 kg
  • Capacity (MT): 25
  • Load Center (in): 48 in. / 1219 mm
  • Wheelbase (in): 170.0 in. / 4318 mm
  • Engine: QL9 -C250 4F
  • Transmission: TE-17 3-sp. APC
  • Mast (ft/Type): 11 UV
  • Carriage Att. (in/Type): C-100
  • Forks (in): 5x10x96
  • Brake Type: Hydraulic
  • Volts: 24
  • Tires: 14.00 X 25-24PR

Standard Features:

  • 11-ft. ULTRA-VU 2-Stage Mast (155-in lowered height)
  • 100-in Pin-type "C" Carriage
  • 5-in X 10-in X 96-in pin mounted forks
  • Cummins QSL9 250Hp Tier-4 final diesel engine
  • Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension)
  • Dana TE-17 3-speed powershift transmission
  • Powertrain Protection System for engine and transmission
  • Axletech PRLC1794 HD planetary drive axle with wet disc brakes
  • Taylor HD-450 welded steel steer axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • Solid plate steer angle limitation (more contact area than bolt heads which require adjustment)
  • 14.00 X 25 - 20PR bias pneumatic drive and steer tires (high load)

Chassis

  • All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
  • Integral counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Sliding engine hood (on rollers), side service doors and removable floor panels open to expose drive train for ease of maintenance.

Cab

  • Enclosed 2-door steel all-welded Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
  • 32,000 BTU heater and interior circulation fan
  • Tinted glass with front and rear windshield wipers and front windshield washer
  • Fully adjustable air ride swivel seat with 35° of rotation (15°/20° left-right)
  • Multifunction Joystick mounted on adjustable arm rest (11-button command with integrated directional shift control)
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) with 7-in touch screen color display
  • One-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • Color and number coded wiring.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical

  • 24-volt electrical system with 95 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Dual electric trumpet horns (116 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms
  • (4) forward facing LED work lights (cab mounted)
  • (2) rear facing LED work lights ("A" pillar mounted)
  • (2) LED work lights (mast mounted)

VIP

  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video
XH-550M Heavy Duty ForkliftBrochure View *Brochure will open in a new window
View Gallery *Image Gallery will open in a new window
No video available at this time

Taylor Forklifts of Florida provides Heavy Duty Forklift sales, parts, and service for the state of Florida. Taylor Forklifts and Material Handling Equipment are designed, engineered, and manufactured in the United States of America. Industries such as Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring commonly use Taylor® Products.

For information on any of the products we offer. please contact us