SSI-2020 Large Capacity Forklift / XH-925L

SSI-2020

Large Capacity Forklift
XH-925L

XH-925L ArrayClick Image to Enlarge

Taylor® XH-925L

The XH-925L Heavy Duty Forklift tackles the heaviest loads with ease. The Taylor XH-Series 48-in. L.C. lift trucks feature T4 Final diesel engines utilizing 388 HP, heavy duty drive and steer axles, and like all of our other Pneumatic lift trucks, End-User diagnostics that allow you to customize operating parameters and troubleshoot most codes without the need for service calls. Rugged environments with the heaviest loads are where the HD Large Capacity XH-Series thrives. Common applications include, but are not limited to, Steel & Aluminum, Stevedoring, Port Operations, Intermodal, Concrete, Forest Products.
Print Friendly

  • Capacity: 92500 lbs / 41957 kg
  • Capacity (MT): 42
  • Load Center (in): 48 in. / 1219 mm
  • Wheelbase (in): 225.0 in. / 5715 mm
  • Engine: Volvo 12.9L-TAD1371VE-388 4F
  • Transmission: TE-30 5-sp. Powershift
  • Mast (ft/Type): 15 UV
  • Carriage Att. (in/Type): C-120
  • Forks (in): 6x12x96
  • Brake Type: Hydraulic
  • Volts: 24
  • Tires: 18.00 X 33 - 40PR

Standard Features: XH-925L

  • 15-ft Direct Lift 2-Stage Mast (276-in lowered height)
  • 120-in Pin-type “C” Carriage
  • 6-in X 12-in X 96-in pin mounted Forks
  • Volvo 12.9L TAD1371VE 388-HP (Turbocharged) Tier 4 Final Diesel Engine
  • Donaldson dry-type air cleaner w/safety element & restriction indicator(vertical air intake extension)
  • Dana TE-30 5-Speed Powershift Transmission
  • Powertrain Protection System for engine and transmission
  • Kessler D-106 planetary Drive Axle with Wet Disc Brakes
  • Taylor 600 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • 18.00 X 33 – 40PR bias pneumatic drive and steer tires

Chassis

  • All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
  • Bolted counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Side service doors and removable floor panels open to expose drive train for ease of maintenance.

Cab

  • Enclosed 2-door steel all-welded DREAM Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
  • 32,000 BTU heater and defrost
  • Tinted glass with front and rear windshield wipers and washers
  • Fully adjustable air ride swivel seat
  • Multifunction Joystick mounted on adjustable arm rest (integrated directional shift control)
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown(5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) …see next page for additional info
  • 7-in touch screen color display
  • TaylorTrak Pro Advanced Fleet Telematics hardware
  • The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • All wiring is color and number coded.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical

  • 24-volt electrical system with 110 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • (4) forward facing LED work lights (Cab mounted)
  • (2) rear facing LED work lights (Cab mounted)
  • (2) LED work lights (Mast mounted)
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Dual trumpet air horns (126 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms

Vehicle Information Package

  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video
XH-925L Heavy Duty ForkliftBrochure View *Brochure will open in a new window
No other images available at this time
No video available at this time

Taylor Forklifts of Florida provides Heavy Duty Forklift sales, parts, and service for the state of Florida. Taylor Forklifts and Material Handling Equipment are designed, engineered, and manufactured in the United States of America. Industries such as Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring commonly use Taylor® Products.

For information on any of the products we offer. please contact us